Stone Slab Dimensions: What 8 ESG Inventory Records Show

Full natural stone slab supported in a storage rack

Stone slab dimensions vary between products and inventory records, so a trade name is not a complete size specification. In eight selected ESG records with complete dimensions, listed lengths range from 2600 to 3300 mm and widths from 1650 to 2050 mm. These are recorded examples, with the selected slab and final layout requiring confirmation.

This small inventory study describes the supplied ESG Product Inventory workbook. It is a transparent review of selected records, not a current stock report, random market sample or statement of the dimensions every slab will provide.

How were these stone slab dimensions selected?

We selected the complete dimension records for Bianca Perla, Calacatta White, Ceppo Rosso, Fantasy Lux, Patagonia Crystal, Rosso Travertine and the two Super White entries. The table includes their individual inventory references so the sample can be checked.

Aqua Green was considered but excluded because its length and width fields were incomplete in the supplied sheet. We did not estimate those values, combine quantities or treat repeated product names as a single physical slab.

The source has no confirmed live-stock timestamp for this article. The findings describe the supplied records only, and ESG should confirm the actual selected material before specification or reservation.

Which natural stone slab sizes appear in the sample?

The eight records list the dimensions below in millimetres. They are inventory examples, not a universal Australian slab standard or a guarantee of currently available pieces.

Inventory referenceProduct labelListed length × widthListed thickness
ESGS-009Bianca Perla2930 × 1650 mm20 mm
ESGS-023Calacatta White2970 × 2000 mm20 mm
ESGS-024Ceppo Rosso K47442920 × 1900 mm20 mm
ESGS-038Fantasy Lux3300 × 2050 mm20 mm
ESGS-055Patagonia Crystal3200 × 2000 mm20 mm
ESGS-061Rosso Travertine2600 × 1700 mm20 mm
ESGS-064Super White3240 × 1970 mm20 mm
ESGS-065Super White (Honed)3200 × 2000 mm20 mm

Read typical size guides as planning references rather than ordering specifications. Confirm the selected slab, finish and dimensions with ESG, then confirm the finished pieces on the final site measure.

What do the figures tell you about slab thickness and size?

Within this selected sample, listed lengths span 2600–3300 mm and listed widths span 1650–2050 mm. All eight records state 20 mm thickness, but that does not establish the thickness of the whole ESG range.

The two Super White records list 3240 × 1970 mm and 3200 × 2000 mm respectively. That is a practical example of why a familiar trade name should not substitute for a confirmed slab reference.

These are descriptive findings from eight selected records. They do not establish average Australian slab sizes, market popularity, performance or a product’s current stock quantity.

Stone slab dimensions: Ceppo Rosso slab at ESGMarble collection

Ceppo Rosso

Inspect the actual slab and confirm its finish and suitability.

View stone
Stone slab dimensions: Calacatta White slab at ESGMarble collection

Calacatta White

Inspect the actual slab and confirm its finish and suitability.

View stone
Stone slab dimensions: Super White slab at ESGDolomite collection

Super White

Inspect the actual slab and confirm its finish and suitability.

View stone

How should usable slab dimensions guide your kitchen plan?

Have the fabricator review the actual slab and the pieces required, rather than converting a catalogue rectangle directly into a finished layout. Usable slab dimensions can be affected by shape, selected features, edges, openings and fabrication decisions.

InformationPlanning usefulnessRemaining check
Product name aloneLimitedExact inventory record and slab
Recorded length and widthUseful starting pointActual usable material
Selected slab and measured layoutHigherFabricator approval and support

A large enough overall area does not prove that every piece will fit. Review pattern direction, joins, sink and cooktop openings, overhangs and handling access before approving fabrication.

For manufactured options, consult Safe Work Australia’s engineered stone ban guidance following the ban on prohibited benchtops, panels and slabs from 1 July 2024. Natural stone processing can still release hazardous silica dust, so never cut, grind, sand or drill stone yourself.

What else should you know?

Are these the current sizes available from ESG?

The table reports dimensions from the supplied inventory workbook, without a confirmed live-stock timestamp. It does not reserve a slab or establish current availability. Ask ESG to confirm the selected material, finish, thickness and usable dimensions, then have your fabricator review the actual slab against the measured project.

Do all stone slabs have 20 mm thickness?

No. All eight selected records in this study list 20 mm, but that is a finding about this sample only. It does not describe every stone product or installation. Confirm the actual slab thickness and distinguish it from a built-up or mitred edge’s apparent depth.

Why are there two Super White sizes in the table?

The workbook contains two separate Super White inventory references with different listed dimensions. Both are retained as records in this sample rather than treated as the same physical slab. Confirm the exact reference and selected material with ESG instead of ordering from the trade name alone.

Can the recorded rectangle be used to calculate a cutting layout?

Recorded length and width provide a starting envelope, but they do not establish a complete cutting layout. The fabricator needs the actual slab, usable areas, measured pieces, pattern priorities, openings and join strategy. Ask for that review before approval, and never cut or drill the stone yourself.

REQUEST FOR A QUOTE

Call us